[DMCForum] Re: Rich A's continuing potential CPR problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Rich A's continuing potential CPR problem



All that's in the CPR is a bi-metal piece attached to a spring. Like
the thermostat in your house for your HVAC.

That thing will curl up whether it's heated by the little element in
the housing, or by the heat from the engine. You yourself said the PRV
runs hot and you burn yourself hours after it cools down.

Even so it'll just be better to trouble shoot with a fuel pressure
test rig.

BUT, before we get to that, read my next post....

Rich

--- In DMCForum@xxxxxxxxxxxxxxx, "content22207" <brobertson@xxxx> wrote:
> If CPR closes from radiant heat alone, might that indicate internal
> malfunction since warm engine misbehaves whether or not it's plugged
in? 
> 
> Is odd that engine runs perfectly cold but herks & jerks warm.
> Inadequate fuel supply should be worse before, not later. That's why I
> wonder if CPR may be sticking OPEN.
> 
> If engine indeed starved for fuel, could a vacuum leak be hiding
> somewhere that's interfering with fuel metering as throttle plates
> open? Line to HVAC mode switch is a big one that bit me.
> 
> Bill Robertson
> #5939
> 
> >--- In DMCForum@xxxxxxxxxxxxxxx, "Scott Mueller"
> <scott.a.mueller@xxxx> wrote:
> > Yes.  The electric element speeds up the process.
> > 
> > -----Original Message-----
> > From: cruznmd [mailto:racuti1@xxxx] 
> > Sent: Tuesday, November 04, 2003 1:16 PM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: [DMCForum] Re: CPR compared to choke plate (Rich A)
> > 
> > 
> > I don't have my manual handy but I agree.
> > 
> > However, the electrical connection is also to heat the bi-metal srip 
> > up to do the same thing yes?
> > 
> > --- In DMCForum@xxxxxxxxxxxxxxx, "Scott Mueller" 
> > <scott.a.mueller@xxxx> wrote:
> > > It conducts heat from the engine.
> > >  
> > > It is explained in the DMC Maint. Manuals
> > >  
> > > Scott Mueller
> > > 002981
> > > RNDOLA
> > > 
> > > -----Original Message-----
> > > From: Walter Coe [mailto:Whalt@xxxx] 
> > > Sent: Tuesday, November 04, 2003 12:26 PM
> > > To: DMCForum@xxxxxxxxxxxxxxx
> > > Subject: Re: [DMCForum] Re: CPR compared to choke plate (Rich A)
> > > 
> > > 
> > > > Radiant engine heat alone won't open electric choke
> > > spring.
> > > 
> > > But the Bosch fuel injection literature all says that the
> > > CPR does rely on radiant engine heat.
> > > 
> > > Walt
> > > 
> > > 
> > > 
> > > Yahoo! Groups Sponsor      
> > > 
> > > ADVERTISEMENT
> > >  
> > > 
> > <http://rd.yahoo.com/M=267637.4116732.5333197.1261774/D=egroupweb/S=17
> > 051262
> > > 15:HM/A=1754452/R=0/SIG=11tpoan5t/*http://www.netflix.com/Default?
> > mqso=60178
> > > 324&partid=4116732> click here      
> > >  
> > > <http://us.adserver.yahoo.com/l?
> > M=267637.4116732.5333197.1261774/D=egroupmai
> > > l/S=:HM/A=1754452/rand=620744116>       
> > > 
> > > To unsubscribe from this group, send an email to:
> > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > > 
> > > 
> > > 
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> > > <http://docs.yahoo.com/info/terms/> . 
> > > 
> > > 
> > > 
> > > 
> > > [Non-text portions of this message have been removed]
> > 
> > 
> > 
> > Yahoo! Groups Sponsor      
> >  
> >
>
<http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512
62
> >
>
15:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autoredi
r?
> > camp=556&lineid=3614674&prop=egroupweb&pos=HM>       
> >  
> >
>
<http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm
ai
> > l/S=:HM/A=1524963/rand=264383649>       
> > 
> > To unsubscribe from this group, send an email to:
> > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> > <http://docs.yahoo.com/info/terms/> . 
> > 
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=267637.4116732.5333197.1261774/D=egroupweb/S=170512
6215:HM/A=1754451/R=0/SIG=11t8a5ls2/*http://www.netflix.com/Default?mqso=6
0178323&partid=4116732> click here	
 
<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupm
ail/S=:HM/A=1754451/rand=163911425> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated