Exactly. Would these not work or are you going after a different end result? Greg -----Original Message----- From: Travis Goodwin [mailto:tgoodwin@xxxxxxxxxxxx] Sent: Thursday, October 30, 2003 1:58 PM To: 'DMCForum@xxxxxxxxxxxxxxx' Subject: RE: [DMCForum] Re: Dig this... a groovy idea I think he's talking about the LEDs that have been converted with an incandescent base. > -----Original Message----- > From: cruznmd [mailto:racuti1@xxxxxxxxxxxx] > Sent: Thursday, October 30, 2003 2:09 PM > To: DMCForum@xxxxxxxxxxxxxxx > Subject: [DMCForum] Re: Dig this... a groovy idea > > There are LED drop in replacements for the DeLorean? > > Who makes these? > > Rich > > --- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx> wrote: > > Would the LED drop-in replacements not suffice? > > > > Greg > > > > -----Original Message----- > > From: Travis Goodwin [mailto:tgoodwin@xxxx] > > Sent: Thursday, October 30, 2003 1:42 PM > > To: 'DMCForum@xxxxxxxxxxxxxxx' > > Subject: RE: [DMCForum] Re: Dig this... a groovy idea > > > > > > Hmmm. That's a good idea. I might have to make this a handy winter > project. > > I'm not a EE the whole thing should be simple. LEDs and resitors > and that's > > it. All you need to know is what kind of inline resistor to use. > > > > R = (Vbattery - Vled) / (IVled), > > > > You've got 12-14V supply (Vbattery). Most LEDs have a .02A forward > current > > (Vled) regardless of brightness. The forward voltage of the LED > (FVled) is > > indicated on the package. This varies with brightness. > > > > If I use the super bright I bought and stuck it in the car I'd have > the 12V > > from the battery with an LED with 2.4V forward voltage and .02A > forward > > current. That gives me a 480Ohm resistor. > > > > One 480ohm resistor per LED mounted on the board. Hell, you could > probably > > use the existing circuit board and just drill mounting holes for > the lights. > > > > > > Thus endeth the lesson. > > > > > > > -----Original Message----- > > > From: cruznmd [mailto:racuti1@xxxx] > > > Sent: Thursday, October 30, 2003 1:41 PM > > > To: DMCForum@xxxxxxxxxxxxxxx > > > Subject: [DMCForum] Re: Dig this... a groovy idea > > > > > > Hey Travis, > > > > > > Any chance of figuring out how to adapt red LED's to our > tail/brake > > > lights and losing the light bulbs? > > > > > > Maybe even the turn signals? > > > > > > Rich > > > > > > > > > --- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> > wrote: > > > > Just went out to Radio Shack and bought 2 super bright red, > jumbo > > > LEDs. My > > > > plan is to build 2 small boxes that will attach to the exhaust > > > vents of my > > > > BTTF conversion. Now the exhaust vents will glow an eerie red > all > > > the time > > > > and the fog will be red at night. > > > > > > > > Hopefully I'll have pics tomorrow if it works out. > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=267637.4116730.5333196.1261774/D=egroupweb/S=170512 6215:HM/A=1754451/R=0/SIG=11tm86fb5/*http://www.netflix.com/Default?mqso=6 0178323&partid=4116730> click here <http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupm ail/S=:HM/A=1754451/rand=728969492> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>