According to tech manual (page A:02:01) inlet valve #1 starts to open 9 degrees BTDC. If correct, you could pop off valve cover and watch rocker arm start to move... Speaking of cam shafts: Could I get Martin G to verify these R30 numbers with Darren: Inlet: 30 BTDC-72 ABDC Exhaust: 72 BBDC-30 ATDC Seems awful long duration... Bill Robertson #5939 >--- In DMCForum@xxxxxxxxxxxxxxx, "Walter Coe" <Whalt@xxxx> wrote >I would have terrible luck trying to tune it by hear like Bill suggests. > There must be a procedure for setting/verifying the position of the timing > mark. Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=194081.4074964.5287182.1261774/D=egroupweb/S=170512 6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code= 30509&media=atkins> click here <http://us.adserver.yahoo.com/l?M=194081.4074964.5287182.1261774/D=egroupm ail/S=:HM/A=1732161/rand=414639234> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>