[DMCForum] Hard plastic lines to/from HVAC mode switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Hard plastic lines to/from HVAC mode switch



Should we add hard plastic lines to/from HVAC mode switch to mandatory
DeLo mods (alongside fan fail fixes, TAB's, etc)?

My 1/8" line to heater core shutoff valve was broken in several
places. 1/4" line was intact but brittle. Switch itself is fine but
rubber harness not vacuum tight -- I simply transferred hoses directly
to switch nipples.

Think last piece in my vacuum leak puzzle has been solved...

Bill Robertson
#5939




Yahoo! Groups Sponsor	 
 
<http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512
6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore
dir?camp=556&lineid=3614674?=egroupweb&pos=HM> 	 
 
<http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm
ail/S=:HM/A=1524963/rand=888575964> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated