I fixed one yesterday - the solder joints where the socket pins mount to the board were badly done originally and on this ne, the w/s washer didn't work. Does the wiper module also give you the 4 sweeps when you use the w/s washer? I thought it was just for intermittent wipe, but his one I had yesterday didn't work either way. The "one sweep" is controlled by the relay under the dash, not the module. Martin Walter Coe wrote: >When these modules fail, they get two specific symptoms. The one we just >mentioned is that the wipers don't like to turn off but instead stay in >intermittent mode. The other symptom is that high speed position is the >same as the low speed position. > >The way the module is set up, you can unplug the two cables going to it and >then plug those together eliminating the module. When I try this the wipers >now have working fast & slow modes but no intermittent mode (of course). > >Walt > > Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=259538.4000197.5214659.1261774/D=egroupweb/S=170512 6215:HM/A=1750876/R=0/SIG=11v1mrq3u/*http://hits.411web.com/cgi-bin/hit?pa ge=1762-1062629109228440> click here <http://us.adserver.yahoo.com/l?M=259538.4000197.5214659.1261774/D=egroupm ail/S=:HM/A=1750876/rand=841548290> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>