You must have a pair from first production run. My instructions mention that original owners wanted to double nut, and that jamb nuts were included for that purpose (actually he recommended putting jamb nuts closest to washer, but I installed normally). Don't know your thread pattern, but mine came 7/16x20 (custom shank though -- about 1/2"). If yours same is ultimately easy to buy some grade 5 or 8 lock nuts. Bill Robertson #5939 >--- In DMCForum@xxxxxxxxxxxxxxx, Samuel <samuel_yahoo@xxxx> wrote: > Not with the pair I got. Just got a couple washers and a nut each. > > content22207 wrote: > > >Toby Peterson provided locknuts and jamb nuts. I used both. > > > >Bolts are 19mm 12 point. Used an offset wrench to reach inside frame > >(all my sockets are 6 point). > > > >Net splurge was only $20 (which included shipping BTW). > > > >My factory bolts are nearly 100%. Am going to be very irritated if > >these super bolts bend or snap. > > > >Bill Robertson > >#5939 > > > > > > > >>--- In DMCForum@xxxxxxxxxxxxxxx, "Walter Coe" <Whalt@xxxx> wrote: > >> > >> > >>>BTW: did anyone else with Toby bolts find them disconcertingly light? > >>> > >>> > >>Look and feel like aluminum! In theory are hardest metal ever invented > >>by modern man. Guess I'll find out... > >> > >>You mean you actually splurged and bought Toby-TABs? Yeah, they do feel > >>lighter than regular bolts, but not as light as aluminum. I found > >> > >> > >that they > > > > > >>could still pick up a very strong magnet. The Walt-TABs (also > >> > >> > >Inconel 718) > > > > > >>that I'm hocking pick up a magnet very slightly better than > >> > >> > >Toby-TABs. I > > > > > >>have a poop sheet on them somewhere that I'll post online (when I > >> > >> > >can find > > > > > >>it again). It gives a list off how much of each element is in the > >> > >> > >alloy. > > > > > >>Did you have a problem finding 12 point tools to fit the Toby-TABs? > >> > >> > > Do you > > > > > >>feel comfortable not using a lock nut? > >> > >>Walt > >> > >> > > > > > > > >To unsubscribe from this group, send an email to: > >DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=256694.4002236.5216697.1261774/D=egroupweb/S=170512 6215:HM/A=1784493/R=0/id=noscript/SIG=11q7p9e7k/*http://webevents.yahoo.co m/universal/intolerablecruelty/> <http://us.adserver.yahoo.com/l?M=256694.4002236.5216697.1261774/D=egroupm ail/S=:HM/A=1784493/rand=859065924> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN