Hey Rich, Hope it all works out for you. Post some pics if you have any? Best wishes, John Dore, Ireland. --- In DMCForum@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote: > Oooooooooook. So my car is at the welder's. > > This is the first time I've had it on a lift, and the first time I've > been able to see in greater detail how certain things are attached. > > The first thing I'd like to say is, if anyone experienced had seen > this car, I would have been advised NOT to buy it. > > But I went alone and now I have to work with it. That's fine. > > There was very little of the bottom part of the crumple tube left. > The main cross bar that goes across the front of frame...uh the part > that "boxes in" the "Y", that the tube attaches to is rusted away in > the middle. There is also some concern for the metal that the lower > control arms attach to. > > However, he showed me how he plans to build it all out again and what > metal he's going to use. He'll be able to reinforce the control arm > area too. I saw some of his handywork in the shop. I should be in > good hands. > > We estimate the cost to be between $300-500.00. Pray for me. > > Rich Yahoo! Groups Sponsor <http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512 6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore dir?camp=556&lineid=3614674?=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm ail/S=:HM/A=1524963/rand=422893322> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>