[DMCForum] Re: Rich's 2nd to last straw
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Rich's 2nd to last straw



That's my problem. My steering is totally non-functional right now.
You should see my wheels.


--- In DMCForum@xxxxxxxxxxxxxxx, Jim Strickland <ihaveanaccount@xxxx>
wrote:
> The thing I hate most about the crumple tube is that when it bends or
> crumples, it messes up your CASTER.  I've considered making a new
> trailing arm (or something) with heim(sp) joints to get the caster
out of
> there.
> 
> Jim
> 
> On Sun, 28 Sep 2003 03:25:14 -0000 "content22207"
> <brobertson@xxxx> writes:
> > People have grabbed Rich's subject line & run with it in directions
> > not in original post...
> > 
> > His complaint in that post is 100% valid -- crumple extension is way
> > too flimsy. Is a DeLo design flaw. Doesn't take much road salt, 
> > minor
> > impact (watch where you position that floor jack), etc to render
> > useless. Has anyone noticed that first return pipe from radiator has
> > tendency to bang against extension and chip off epoxy? Rich's second
> > to last straw is a light gauge sheet metal extension welded, not
> > bolted for easier replacement, to frame (didn't say a word about
> > electrical system etc)
> > 
> > I personally would have run big frame at least as far as steering
> > rack. Radiator could have been supported on stiffer metal designed 
> > to
> > spread front end collision towards fenders rather than collapsing on
> > itself. Had JZD done same Rich would be on road now...
> > 
> > Can't wait to see what cycle shop comes up with. If it's made of
> > tubular material should be way stronger than anything rest of us 
> > have,
> > including replacement extensions. Should also cost fraction of the
> > price. Rich wants to keep things original, but this may be one mod
> > he's happier with than stock.
> > 
> > I just hope is ready by Oct 18.
> > 
> > Bill Robertson
> > #5939
> > 
> > 
> > 
> > ------------------------ Yahoo! Groups Sponsor 
> > 
> > To unsubscribe from this group, send an email to:
> > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > 
> >  
> > 
> > Your use of Yahoo! Groups is subject to 
> > http://docs.yahoo.com/info/terms/ 
> > 
> > 
> > 
> 
> 
> ________________________________________________________________
> The best thing to hit the internet in years - Juno SpeedBand!
> Surf the web up to FIVE TIMES FASTER!
> Only $14.95/ month - visit www.juno.com to sign up today!



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=244522.3707890.4968055.1261774/D=egroupweb/S=170512
6215:HM/A=1595054/R=0/SIG=124ukap9t/*http://ashnin.com/clk/muryutaitakenat
togyo?YH=3707890&yhad=1595054> Click Here!	
 
<http://us.adserver.yahoo.com/l?M=244522.3707890.4968055.1261774/D=egroupm
ail/S=:HM/A=1595054/rand=319854258> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated