VS26090 is valve cover gaskets only, not a complete engine kit. Bill Robertson #5939 >--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote: > I'll take a look at the Fel-Pro kit I have and get the number off of there. > I ended up getting everything for $75 on Ebay. > > I haven't had any leaks on my covers. The only leak I had was on the plate > on the RS head that allows the cam journal to poke out when removing it from > the timing chain sprocket. A retorque and all it well with the world. > > > -----Original Message----- > > From: content22207 [mailto:brobertson@xxxx] > > Sent: Monday, September 22, 2003 4:33 PM > > To: DMCForum@xxxxxxxxxxxxxxx > > Subject: [DMCForum] FelPro valve cover gasket number > > > > FelPro number on box is VS26090. Stock item at Autozone. Comes up in > > computer under Volvo PRV of some ilk (probably 1985 760). They can > > pull it just by box number. > > > > Think you'll like 'em. > > > > Bill Robertson > > #5939 > > > > >--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote: > > > My kit was for a Volvo 760 GLE, 1983. Which ones are you looking at? > > > > > > > -----Original Message----- > > > > From: content22207 [mailto:brobertson@xxxx] > > > > Sent: Monday, September 22, 2003 3:30 PM > > > > To: DMCForum@xxxxxxxxxxxxxxx > > > > Subject: [DMCForum] FelPro valve cover gasket specs > > > > > > > > Checked out a set of FelPro #VS26090 at lunch. Indeed metal core with > > > > rubber facings. Not thickest in the world -- about .045" -- but > > > > imminently better than a piece of paper. > > > > > > > > Need metal core because people have tendency to over torque solid > > rubber. > > > > > > > > I have significant mismatch between timing chain cover and cylinder > > > > head so seated gasket in a bed of silicone. If doing same remember you > > > > need two torqings: one gentle just to flatten silicone, and one hard > > > > after it's set up. > > > > > > > > Bill Robertson > > > > #5939 > > > > > > > > > > > > > > > > > > > > To unsubscribe from this group, send an email to: > > > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > > http://docs.yahoo.com/info/terms/ > > > > > > > > To unsubscribe from this group, send an email to: > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512 6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code= 30509&media=atkins> click here <http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm ail/S=:HM/A=1732161/rand=477315240> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>