If you go into a model shop that sells japanese RC cars, you can buy some really neat (expensive) screwdriver-style allen keys. I bought and regularly use a 3mm one for mixture adjustment (NOT idle adjustment!!!) It's also really handy for getting the mirror switch out without the innards going sproiiiinggg. Martin Walter Coe wrote: >>What size allen wrench is needed to adjust the idle mix screw? >> >> > >Like Samuel said, mine is a long T-handle that was part of a set. They are >common at Sears, NAPA, Snap-On, etc. The one you need is a 3mm. You could >buy just one, but it is really handy to have the whole set. I use the 5mm >to get cold start valves off. > >Walt > > [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512 6215:HM/A=1754016/R=0/SIG=11pv1u2ju/*http://www.ediets.com/start.cfm?code= 30529&media=atkins> click here <http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm ail/S=:HM/A=1754016/rand=564854169> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>