They -do- sell it. That's where I got mine from actually. Stephen Wynne figured out the problem right away at Cleveland and sent me one. Once it arrived, I realized I already had one -- I just thought it was for something else (my car also came with a lot of Volvo truck parts, an aluminum billet rocket ship, and several deadbolt locks. I assumed that this bracket was part of one of the deadbolts -- it looks a lot like it could be.) I'll try and get a photo tonight, but I made a quick drawing of it to the best of my memory -- http://www.projectvixen.com/images/steeringbracket.gif If you look carefully under part 9 on http://www.usadmc.com/dmcstore/ViewDir.asp?PageID=67 <http://www.usadmc.com/dmcstore/ViewDir.asp?PageID=67&PageCat=5%2DSuspensi on+> &PageCat=5%2DSuspension+ and+Steering , you can barely see it under the bracket, but it is shown (but not numbered). -Dave ----- Original Message ----- From: "Jim Strickland" <ihaveanaccount@xxxxxxxx> To: <DMCForum@xxxxxxxxxxxxxxx> Sent: Friday, September 12, 2003 1:57 PM Subject: Re: [DMCForum] Slip 'n slide > Gee, can I get one too? I am 95% sure that I don't have one of these > either. > > Also, it does not look like DMC sell it.... hmmm... > > Jim > > > On Fri, 12 Sep 2003 08:15:57 -0400 "Dave Stragand" > <dave.stragand@xxxxxxxxxxxxxxx> writes: > > Mine was the same way. There is a bracket under the passenger side > > mount that was missing. I don't believe it is illustrated in the > > parts manual. If yours is missing, let me know and I can send you > > one (I have an extra). > > > > -Dave > > ----- Original Message ----- > > From: cruznmd > > To: DMCForum@xxxxxxxxxxxxxxx > > Sent: Thursday, September 11, 2003 5:49 PM > > Subject: [DMCForum] Slip 'n slide > > > > > > Ok, I've had someone in the car to turn the steering wheel from > > lock-to-lock. > > > > Here's a new twist: The entire steering rack is -sliding- from > > side to > > side in it's mounts when you turn the wheel. > > > > The frame metal isn't shifting like I thought. The brackets aren't > > shifting. the rack is slipping in the rubber bushings in the > > brackets, > > or the bushings appear to be slipping in the brackets. > > > > Can anyone take a picture of their brackets for me? I'm looking > > for a > > view from above, through the brake master cylinder access plate. > > > > What I don't understand is, it looks like the brackets were welded > > to > > the crumple tube at the factory, yet there are bolts underneath to > > remove them. > > > > I don't quite understand what I'm looking at. > > > > Rich > > > > > > Yahoo! Groups Sponsor > > ADVERTISEMENT > > > > > > > > > > To unsubscribe from this group, send an email to: > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of > > Service. > > > > > > [Non-text portions of this message have been removed] > > > > > > ------------------------ Yahoo! Groups Sponsor > > > > To unsubscribe from this group, send an email to: > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > > > > > Your use of Yahoo! Groups is subject to > > http://docs.yahoo.com/info/terms/ > > > > > > > > > ________________________________________________________________ > The best thing to hit the internet in years - Juno SpeedBand! > Surf the web up to FIVE TIMES FASTER! > Only $14.95/ month - visit www.juno.com to sign up today! > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=251812.3856299.5103760.1261774/D=egroupweb/S=170512 6215:HM/A=1754451/R=0/SIG=11tkldm5d/*http://www.netflix.com/Default?mqso=6 0178323&partid=3856299> click here <http://us.adserver.yahoo.com/l?M=251812.3856299.5103760.1261774/D=egroupm ail/S=:HM/A=1754451/rand=924939988> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>