Well then I think I am saying something completely different then. Mine had a clamp between the inner and outer boot and no clamp on the outer boot. Either way it seems like it would be a good idea to seal the connections from moisture. Greg -----Original Message----- From: Jim Strickland [mailto:ihaveanaccount@xxxxxxxx] Sent: Thursday, September 11, 2003 11:31 PM To: DMCForum@xxxxxxxxxxxxxxx Subject: Re: [DMCForum] Dumb question No. You are saying something totally different. Your hose clamp is between your inner and outer boot. Mine is around both boots. My clamp keeps water from getting on top of the fuel pump. Jim On Thu, 11 Sep 2003 22:50:25 -0400 "timnagin" <timnagin@xxxxxxxxxxxxxx> writes: > By 'boot' I meant the over all finishing cover for the entire > assembly. In > the eBay picture what you see would drop in the tank and a clamp > would > attach around the black rubber piece holding the pump, and the > 'boot' would > cover all of this, at least that is how mine was assembled. Maybe > we are > saying the same thing in different ways. I really need to get a new > digital > camera. > > Greg > > -----Original Message----- > From: Jim Strickland [mailto:ihaveanaccount@xxxxxxxx] > Sent: Thursday, September 11, 2003 10:32 PM > To: DMCForum@xxxxxxxxxxxxxxx > Subject: Re: [DMCForum] Dumb question > > > You've described something totally different than me. > > I said that the clamp goes over the inner and outer boot, you just > said > that the boot goes over the clamp. I don't see how the outer boot > would > go over the hose clamp (or why). > > Rich, you got it wrong again, you said "the upper/outer one that the > wires pass thru was toasted". The wires pass BETWEEN the boots. > Only > the two fuel hoses go through the outer boot. > > Jim > > > > Here is a quick picture of how it should look. > > > > > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem <http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33555&i > &category=33555&i > tem > > =2432087334 > > > > When you drop the pump in, the shiny white ring in the picture > > should be > > inside the mouth of the tank, and the black rubber lip above it > will > > be on > > the outside with a hose clamp around it. The boot fits over the > > whole > > assembly when installed. > > > > I mentioned before how clean mine was when I took everything apart > > and this > > what mine looked like. > > > > Greg > > > > > > ------------------------ Yahoo! Groups Sponsor > > > > To unsubscribe from this group, send an email to: > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > > > > > Your use of Yahoo! Groups is subject to > > http://docs.yahoo.com/info/terms/ > > > > > > > > > ________________________________________________________________ > The best thing to hit the internet in years - Juno SpeedBand! > Surf the web up to FIVE TIMES FASTER! > Only $14.95/ month - visit www.juno.com to sign up today! > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > ------------------------ Yahoo! Groups Sponsor > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=244522.3707890.4968055.1261774/D=egroupweb/S=170512 6215:HM/A=1595055/R=0/SIG=124j83ehr/*http://ashnin.com/clk/muryutaitakenat togyo?YH=3707890&yhad=1595055> Click Here! <http://us.adserver.yahoo.com/l?M=244522.3707890.4968055.1261774/D=egroupm ail/S=:HM/A=1595055/rand=593858044> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>