Y'know, I half felt #5939 performed better with RPM relay jumped (when I lost pump ground), but trip back to house was short and I was not in best frame of mind. Have also thought in past about running new circuit to pump (no hot start problems ever). May experiment further... Am running new relay from John Hervey. Bill Robertson #5939 >--- In DMCForum@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote: > Travis, > > Are you the person referenced in that article? It's under Tech > information library, acceleration problems. > > It sounds eerily familiar. This is very like what I'm dealing with, > right down to the engine stutter/shake. > > My RPM relay is new so this shouldn't be the problem, but I'll bet I > can bypass it and see what happens to my acceleration. > > The article states that that may not have been what "Travis'" problem > was. If that is referring to you, what was your cure? Was it the RPM > relay or what? > > The thing is, I bought my relay from Houston I think, and by the date > of mfg on it, it's NOS. (20 yrs old). Hell, it didn't work right when > I bought it. One of the contacts, (the one that triggers the lambda > relay) wasn't bent properly and wouldn't contact when the winding was > energized. I had to fix that. > > Thanks, > > Rich Yahoo! Groups Sponsor <http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512 6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore dir?camp=556&lineid=3614674?=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm ail/S=:HM/A=1524963/rand=494202162> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>