oil pressure guages all peg unless you have bought correct sender and sensor....mine still pegs when i give it gas...at idle it sits at about 75% of the way up dummy wire is usually a rusted mangled burned oil caked wire..mine was toast....just replace wire and it will be fine. no air from radiator is good sign. bleed kit will take care of the rest. just wondering if your engine "seeks" when you first start it? I am curious how the engine will perform under load....one thing i have learned is that most problems seem to reveal themselves when car is at idle... Mike C --- In DMCForum@xxxxxxxxxxxxxxx, "Dave Stragand" <dave.stragand@xxxx> wrote: > I think I'm going to start suggesting that the injector seals are like the copper washers -- one-time use and disposable. I've seen several Ds that have had leaky injector seals -- even new ones that had only been used for a short period of time. > > On your fan problem... is the otterstat mounted upside down? It should be. If the electrical connectors are facing skyward, then an air bubble can get trapped there in the pipe, and the otterstat won't kick over. > > -Dave > > [Non-text portions of this message have been removed] To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor <http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512 6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore dir?camp=556&lineid=3614674?=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm ail/S=:HM/A=1524963/rand=769306653> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN