Re: [DMCForum] Martin's timing procedure
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Martin's timing procedure




cruznmd wrote:

>If I pull the valve covers off and all the valves are in position 
>when they are supposed to be, that will mean I did the valve timing 
>right after all and I'm going to be out of ideas again.
>
Not quite - remember under compression/ignition, the valves will be 
closed on one cylinder for an entire rotation of the crank - you could 
be a tooth out on the chain and not realise it just by taking the rocker 
covers off.

Martin




Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3551198.4824677.1261774/D=egroupweb/S=170512
6215:HM/A=1663535/R=0/SIG=11ps6rfef/*http://www.ediets.com/start.cfm?code=
30504&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3551198.4824677.1261774/D=egroupm
ail/S=:HM/A=1663535/rand=572998839> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated