They come with instructions, and actually aren't very hard. I recommend a new drill bit of the correct size, and go slow and drill it as straight as possible into the old hole. Some folks "lube" the insert with a little red loctite, which also make sure it stays in place permanently. I put a drop on when the insert is threaded about the las 1/4" from being seated. -Dave -----Original Message----- From: cruznmd [mailto:racuti1@xxxxxxxxxxxx] Sent: Thursday, July 03, 2003 8:23 AM To: DMCForum@xxxxxxxxxxxxxxx Subject: [DMCForum] Heli-coil how-to Now I don't care about the manifold. It's toast and I have a like-new set. I want to install a heli-coil in the head because I don't think there's enough metal left to tap it out. Anyone know how to do this? [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=244522.3512152.4794593.1261774/D=egroupweb/S=170512 6215:HM/A=1595055/R=0/SIG=1247d4o3g/*http://ashnin.com/clk/muryutaitakenat togyo?YH=3512152&yhad=1595055> Click Here! <http://us.adserver.yahoo.com/l?M=244522.3512152.4794593.1261774/D=egroupm ail/S=:HM/A=1595055/rand=204984438> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>