I know. I've been reading it over and over and I have it printed out and it's going home with me. A great read. I especially like the idea of heating the whole unit and cooling the stud to extract it. That and a little gentle persuasion... Hopefully after I get done we can combine the two docs. > -----Original Message----- > From: Martin Gutkowski [mailto:webmaster@xxxxxxxxxxxxxx] > Sent: Friday, June 27, 2003 5:14 PM > To: DMCForum@xxxxxxxxxxxxxxx > Subject: Re: [DMCForum] cat bypass pipe ...was: Oh hell, not this again > > > > Walter Coe wrote: > > >You will need a new gasket for the cat connection which should be > included > >in the kit. If you expect one or both studs to break off of the cat then > >you won't be disappointed if they both stay intact. > > > the cat has 4 studs. 2 are easy, one requires removal of the lambda > sensor and the 4th requires the crossover pipe to come off to gain access. > > >Yes, take photos and do a nice technical write-up. Maybe we can fit all > our > >advice into one nice comprehensive novel, err, I mean article. > > > Oi, I know you don't like DMCnews, but I did do an article which I know > you used - so use mine as a starting point :-P > > http://www.dmcnews.com/Techsection/exhaustgasket.html > > Martin > > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor <http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512 6215:HM/A=1564415/R=0/SIG=11t6t7kdo/*http://www.netflix.com/Default?mqso=6 0164784&partid=3170658> <http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm ail/S=:HM/A=1564415/rand=808770105> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>