RE: [DMCForum] angle drive check
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] angle drive check



This is rather crude but I am assuming the angle drive is still in the car
and all cables are connected....remove wheel and cap and put an electric
drill on the end of the angle drive...tighten and let er rip...Walt and I
got mine up to 70mph sitting in my garage :-)

Mike C

-----Original Message-----
From: erikgeerdink [mailto:erikgeerdink@xxxxxxxxx]
Sent: Wednesday, June 04, 2003 10:07 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] angle drive check


ok,
My parts car, of course, has the speedo angle drive.  I don't know 
if it works or not though.  I obviously can't drive the car to check 
it out since the car is destroyed.  I don't want to install it on my 
car to check it out either.  Is there a way that I can check to see 
if this thing works?  I'm assuming it does.  It last worked the last 
time it drove and got into a wreck, back in November of 2002.  I'm 
assuming it worked.  Any way to check for sure?

Erik



Yahoo! Groups Sponsor	 
 
<http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512
6215:HM/A=1564415/R=0/SIG=11t6t7kdo/*http://www.netflix.com/Default?mqso=6
0164784&partid=3170658> 	 
 
<http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm
ail/S=:HM/A=1564415/rand=432008508> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated