Hi list, Long time since I last posted but I wonder if anyone on the list can help. My DMC has been running badly for some time now, not a constant misfire but the engine sounds quite "rumbly" like a huge V8 rather than a smooth V6, it also lacks power and stammers when pulling away. I have changed the following - CPR, Fuel Distributor, Dizzy + Cap + Rotor, all injectors, fuel lines, fuel pump, coil, coil lead, ballast resistors, spark plugs (12 months ago). Freq valve etc... Also has very good and even compression on all cylinders Any ideas? When I removed the plugs, held them on the head and flogged the engine over the sparks were not as impressive as I would have expected, but they did spark. I have also tested the fuel supply pressures and they appear to be normal. Could it just be way out of tune? I checked the timing, which was spot on. Any suggestions of where to start looking would be helpful. James RG Vin# 5462 Yahoo! Groups Sponsor <http://rd.yahoo.com/M=247865.3355058.4641699.1512248/D=egroupweb/S=170512 6215:HM/A=1482387/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1054198976%3e M=247865.3355058.4641699.1512248/D=egroupweb/S=1705126215:HM/A=1482387/R=1 =1054198976%3eM=247865.3355058.4641699.1512248/D=egroupweb/S=1705126215:HM /A=1482387/R=2> <http://us.adserver.yahoo.com/l?M=247865.3355058.4641699.1512248/D=egroupm ail/S=:HM/A=1482387/rand=690649169> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN