Well, for $25 from PJ Grady and let hassle, I think I'll go with route #1. If it goes bad in a couple of years I'll replace it the same way. Thanks for all the help, i'm off to PJGrady.com to buy myself a new bushing. Erik --- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote: > Not so much the winner as you had the unfortunate luck of having bought the > hard plastic kind. The advantage of what you did is that it is technically > correct and should (theoretically) outlast mine. > > If you don't mind the possibility of having to replace your bushing in 5 > years or so, my way should work fine. > > > -----Original Message----- > > From: Cohee, Michael [mailto:mcohee@xxxx] > > Sent: Monday, May 19, 2003 12:12 PM > > To: DMCForum@xxxxxxxxxxxxxxx > > Subject: RE: [DMCForum] Re: shaking steering column > > > > travis, recomeded step 1 to me and i opted for step 2 because i had to > > prove this car will not beat me....i suffered a loss of 6 hours, a broken > > wiper motor arm which will now require 2 more hours of work and another > > $100, and a dryrotted clutch hose that leaked all over the garage :-). > > > > the problem was my bushing was hard plastic and would not bend around the > > column shaft.... > > > > the winner: step 1 travis :-) > > > > > > Mike C > > > > > > > > To unsubscribe from this group, send an email to: > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor <http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512 6215:HM/A=1564416/R=0/*http://www.netflix.com/Default?mqso=60164797&partid =3170658> <http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm ail/S=:HM/A=1564416/rand=310235255> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN