Looks like you guys don't like on-topic posts, huh? ;-)
Nobody can help?
Thanks
Ryan
----- Original Message -----
From: Ryan Hood
To: DMCForum@xxxxxxxxxxxxxxx
Sent: Wednesday, May 07, 2003 1:03 PM
Subject: [DMCForum] Remove Air inlet & mirror?
Does anybody know how to remove the air inlets at the back?
Yesterday I was trying to replace one of the air inlets (Part no
105515) because it was broken on one side and
I also wanted the fix the powerantenna that's inside.
I figured out that it was somehow glued to the panel on one side and to
the side window on the other side. So I pushed that thing REAL hard for
about
20 minutes but wouldn't move. Is there a trick? And what is the best
stuff to glue the replacement on?
Second question: where are the 3 wires from the power antenna going on
82 and 83 models? My radio works. But the antenna is not moving.
Third question: The housing of my LH outside mirror is a little loose.
So it shakes whenever I'm driving. Makes me very dizzy...
I removed the plastic cap from the base part but everything looked OK
there. So I was wondering if there is a screw inside the mirror to tighten
it?
And how do I remove the mirrorglass itself? I hope it's not glued-on?
Thanks!
Ryan & 16216
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
<http://rd.yahoo.com/M=249982.3179269.4495679.1261774/D=egroupweb/S=170512
6215:HM/A=1524963/R=0/*http://hits.411web.com/cgi-bin/autoredir?camp=556&l
ineid=3179269?=egroupweb&pos=HM>
<http://us.adserver.yahoo.com/l?M=249982.3179269.4495679.1261774/D=egroupm
ail/S=:HM/A=1524963/rand=642928474>
To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN