Re: [DMCForum] &^%$@* a/c panel illumination fix
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] &^%$@* a/c panel illumination fix



On 03-05-2003 18:50, Walter Coe wrote:

> I need to sit down with a good schematic and not the one in
> the Workshop manual.  I can't even find the panel lights on it.

Item #48, to the bottom right of the fuses...
The Resistor is #54, the Relay #53.
Having the Zilla-schamtic (funding a good cause!) helps a lot!

> I assume that the left side of the coil (pin 85) is always
> grounded and the right side (pin 86) is supposed to switch
> to +12V whenever the running lights are on?

Yes, that's correct, there should be a Red wire w/ Orange stripe.
And just as I'm writing this it occurs to me that there's a whole
cluster of these at the rheostat...
Have you checked if the wires are OK there???

Good luck,

JAN van de Wouw
Thinking Different...   Using a Mac...
Living the Dream...   Driving a DeLorean...

#05141 "Dagger" since Sept. 2000

------------------------------



Yahoo! Groups Sponsor	 


 
<http://rd.yahoo.com/M=247865.3003379.4507215.1261774/D=egroupweb/S=170512
6215:HM/A=1482387/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1052007002%3e
M=247865.3003379.4507215.1261774/D=egroupweb/S=1705126215:HM/A=1482387/R=1
=1052007002%3eM=247865.3003379.4507215.1261774/D=egroupweb/S=1705126215:HM
/A=1482387/R=2> 	
 
<http://us.adserver.yahoo.com/l?M=247865.3003379.4507215.1261774/D=egroupm
ail/S=:HM/A=1482387/rand=255575773> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated