Re: [DMCForum] Misfire problems
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Misfire problems



Everyone be careful, this is a stern warning for when Walt wants to do
creative probing and will bring his vacuum pump.  Make sure you are
talking about the same thing.  

The thermal control has the 3 vacuum hoses coming out of it, right?  This
part is not that hard to reach, I think I remember.  Just follow the
advance vac line down and you can feel where the three hoses connect. 
Getting them off/on is another issue, though my vac lines just slid off.

Jim

On Mon, 21 Apr 2003 14:30:23 -0400 "Walter Coe" <Whalt@xxxxxxx> writes:
> > Dave, I was just wondering if that area where the thermal contol 
> switch
> > is accesible without removing anything in the engine?
> 
> It would take some creative probing to access the thermal control 
> switch w/o
> taking the intake manifold off.  If you just want to check that it 
> is
> working properly, this can be done using a hand vacuum pump/gauge 
> and
> checking the other ends of the hoses.  When cold, vacuum goes to the 
> warm-up
> regulator.  When warm, it switches the vacuum to the distributor 
> advance.
> And in all cases the lines should hold vacuum (no leaks).
> 
> Want me to bring my vacuum pump?
> 
> Walt
> 
> 
> ------------------------ Yahoo! Groups Sponsor 
> 
> To unsubscribe from this group, send an email to:
> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> 
>  
> 
> Your use of Yahoo! Groups is subject to 
> http://docs.yahoo.com/info/terms/ 
> 
> 
> 


________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Make Money Online Auctions! Make $500.00 or We Will Give You Thirty
Dollars for Trying!
http://us.click.yahoo.com/yMx78A/fNtFAA/i5gGAA/HliolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 


<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated