Re: [DMCForum] Thermostat housing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Thermostat housing



I am looking for the Thermostat cover #102140 because i cant get my
bleeder screw out to put in the hose barb for the auto bleeder kit. The
Thermostat cover can have the hose barb in it already since thats what i
intend to do to it once i get a different Thermostat cover.

I bought an auto bleeder kit thats why i need the housing, i have it
half installed now with a bolt in the other end of the hose.

Later on when i have time i will get the stuck bleeder screw out of my
Thermostat cover but i need to just replace the cover to make a fast
repair.

Mark
6683

Walter Coe wrote:

>  > I am looking for a cheap used Thermostat cover #102140. It doesnt
> need
> > to look pretty but the bleeder screw must be able to come out of it.
>
> If a bleeder screw is replaced with a hose barb for an auto-bleeder
> then the
> threads will be damaged.  The barb is a standard plumbing thread that
> just
> so happens to be very close to the original bleeder screw size.
>
> Walt


[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get a FREE REFINANCE QUOTE - click here!
http://us.click.yahoo.com/2CXtTB/ca0FAA/i5gGAA/HliolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated