[DMCForum] Re: Front Crumple price difference
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Front Crumple price difference



If someone can make a stainless steel frame option, i'm sure you 
could get away with making your own front crumple tube.  I would be 
interested in an aftermarket front crumple tube if you are planning 
on creating them.  It would be better if it were made out of 
stainless though.  That way you have a marketing advantage over the 
current crumple tubes, and even over the full stainless frame.  A 
lot of frames out there are still "good", except for the front 
extension.  I have looked into getting a stainless frame, but I 
don't have $8000.  
let me know if you plan on pursuing this.  

Erik

--- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx> wrote:
> One more thing I just thought of; wouldn't the manufacturer of a 
crumple
> section be required to meet the exact specifications of the OEM 
else risk
> lawsuit if anything happened?
> 
> I have a good friend with a machine shop that could turn these out 
very
> quickly if this restriction did not exist.
> 
> Thoughts?
> 
> Greg


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get a FREE REFINANCE QUOTE - click here!
http://us.click.yahoo.com/2CXtTB/ca0FAA/i5gGAA/HliolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated