So Would that mean as I pulled away I would loose power??? I thought my warm up regulator was dead, then I found this un plugged tonight... Cheers Paul #6463 http://www.paul.salsbury.btinternet.co.uk ----- Original Message ----- From: Jan van de Wouw To: DMCForum@xxxxxxxxxxxxxxx Sent: Sunday, March 23, 2003 7:49 PM Subject: Re: [DMCForum] Vacuum Question On 23-03-2003 20:42, Paul Salsbury wrote: > What would the symptoms be of the vacuum hose being > disconnected from the vacuum advance unit? No Advance at higher RPMs, hence a loss in power I'd say... The vacuum-advance is disabled at idle by the Idle-Speed Microswitch to keep it from messing up the (hunting) Idle is what I understand from the manuals at a quick glance... Good Luck, JAN van de Wouw Thinking Different... Using a Mac... Living the Dream... Driving a DeLorean... #05141 "Dagger" since Sept. 2000 ------------------------------ Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] ------------------------ Yahoo! Groups Sponsor ---------------------~--> Your own Online Store Selling our Overstock. http://us.click.yahoo.com/rZll0B/4ftFAA/46VHAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>