I can't believe you guys!!!! Y'all are pathetic.... ... pathetically hung. If I tried something like it would punch through the floor and cause the car to pole vault. Okay, for a real cruise control check out what www.JCWhitney.com has. http://www.jcwhitney.com/product.jhtml?CATID=4951&BQ=jcw2 They have several, but the above link looks like it would mount on the turn signal stalk and look more OEM than their other ones. You shouldn't need any enhancements to the vacuum reservoir. Typically how cruise controls like this are set up on a DeLorean is that you glue several magnets on the perimeter of the large part of one of the drive axles. (And/or they are held in place with a wire wrapping around all of them.) Then a pickup coil is mounted near by. I have seen several installations on DeLoreans but haven't installed or used one (yet). All the ones that I have seen were mounted in the front left side of the engine compartment and the cable attaches to the throttle by wrapping in front of the engine (under rear window) and around to the right (passenger) side. Keep us posted on what you end up with and how it goes. I want one too. Walt To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>