Glad to hear that! Congratulations on getting it home. --- In DMCForum@xxxxxxxxxxxxxxx, "Jim" <starbuck@xxxx> wrote: > I ended up drilling out the rivets on the steering column and > took the ignition cylinder to a locksmith. He was able to get it working > again. The problem was the wafers were bent. The guys at Sears used the > door key (which was an after market key. If I had my lighted one it > wouldn't have happen) and turned it too hard. So I took the bill to > Sears and they were pretty good and about it and are going to pay for > the towing and Locksmith service. > > Jim > > > > I took my car to Sears to have a wheel alignment. I get a call > > letting me know that they couldn't start it. I go back to Sears and I > > can't turn the key or the wheel at all. I wiggled it and sprayed Wd-40 > > in the key hole and nothing. I've never had a problem of the type > before > > with the car. Also the key is free to pull in and out. I'm waiting now > > on having the car towed to my house. > > Suggestions anyone? > > > > Jim Sleeth > > > > > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > [Non-text portions of this message have been removed] > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>