Re: [DMCForum] You guys are gonna die...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] You guys are gonna die...



> The car is performing better! No more acceleration problems. I think
it's
> doing better than it ever has.

Travis,

Did you do anything to the water pump or top of the engine?  If so, maybe
you fixed a vacuum leak.

But then if overheating had anything to do with it.... check this:
Look in the port on your drivers side valve cover where you put new oil
in.
There should be a white (was white at one time) round plastic grate/filter
in the bottom of the hole that stops large things from falling in there.
Unless you have a habit of pouring chunky new oil in the engine there is
no
use for this grate other than to judge how badly an engine has overheated.
On good engines it looks like new.  On older engines it gets kind of
beige/brown looking.  If an engine has been severely overheated then it
sags
really bad.  Sometimes they fall out (or someone removes them for any
reason), so you might find it suck in the valve cover somewhere.  I did a
valve adjustment on a car that this grate was apparently missing on.  We
found a resinous blob in the port that I think used to be this grate (what
else could it be?) but who knows?

Walt


To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated