[DMCForum] STEERING RACK BREAKDOWN

[mike clemens <rmclemns@xxxxxxxxx>]

I've got an old steering rack that I'm rebuilding and have question that has me stumped.  Starting on the outside you've got the tie rod ends, then the tie rod, then a large "nut" (for the lack of a better name) which connects the tie rod to the "steering drive bar".  This "nut" is located under the boot on each side.  How do you remove this nut?  There is a pin of some sort inserted into the "nut" in the center of the groove of each one.  They do not have a head on them for either a Phillips, Straight Slot, or Allen, so is this a tight fitting pin that needs to be drilled out or what?  Any help would be appreciated.

Mike   TPS   1630


      


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/DMCForum/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:DMCForum-digest@xxxxxxxxxxxxxxx 
    mailto:DMCForum-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/