Mike, Got the picture from you via private email - thanks. OK, here's where you have to get creative: The mode switch is positioned "up" in the picture, in the final configuration as it would be if installed in the car. The picture doesn't show the back of the switch but where the hoses enter it in the diagram is accurate. So you have to start tracing things out. Here's the original drawing: http://www.ryanwright.com/delorean/modeswitch1.jpg Here's the drawing with the vacuum lines colorized: http://www.ryanwright.com/delorean/modeswitch2.jpg Here's a close-up of the mode switch: http://www.ryanwright.com/delorean/modeswitch3.jpg So, from the drawing it's very easy to see where the lines route to, but you're having a problem finding which connection on the back of the mode switch they hook to - correct? That was the same problem I had. This drawing solved it for me, but like you, I had to stare at it for a long time before it clicked. It's even easier now that I've colored the lines in. So, hold the mode switch in position, exactly as it would be if you had it mounted in the car. Then line your vacuum lines up according to the colored tubes in the close-up drawing. You'll have two barbs near the top of the mode switch - the right one is blue, left one is red. Then just go around the switch. Green is next to the red, then yellow, then purple. Of course your real lines aren't these colors... Route them from the mode switch to where the diagram shows them going & test everything. It should work as expected. I hope this helps. Let me know if you need more help. This is how I fixed mine, and it worked perfectly the first time. -Ryan On 9/20/07, mike clemens <rmclemns@xxxxxxxxx> wrote: > > Ryan, > > I'm pretty sure I got it right, but here's the picture > I think you are looking for. Let me know if it's the > right one. > > Mike Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/DMCForum/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/DMCForum/join (Yahoo! ID required) <*> To change settings via email: mailto:DMCForum-digest@xxxxxxxxxxxxxxx mailto:DMCForum-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/