Re: [DMCForum] Hmm....
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Hmm....



You -can- put 15lbs of boost into a PRV, as long as it has an engine 
code beginning Z7U, or Z7X-723 <grin>

Someone recently reported his results on the Alpine forum. A stock GTA 
V6 Turbo with slightly modified turbo and a chargecooler in additon to 
the intercooler, re-mapped with a new ECU rustled up a thumping 
333ft-lbs of torque at 3000rpm. That's better than a Venturi Atlantique 
300! Power still peaked at 250hp though.

The pistons are indeed very different, however the rings are only 0.5mm 
fatter.

http://www.delorean.co.uk/turboarticlepics/pistons.jpg

Martin

timnagin wrote:

> >Put 15 pounds of boost into a PRV and you will end up with with a big
> >box of Volvobits cereal that stays very, very crunchy in milk.
>
> ...and does not contain your recommended daily allowance of iron :)
>
> Greg
>
> <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
>
>
>  




[Non-text portions of this message have been removed]



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated