[DMCForum] Re: Help! Truck cable broken!

["Ryan Wright" <ryanpwright@xxxxxxxxx>]

I'm in. Thank God for Toby's electric trunk release.

I'd installed the electric trunk release but hadn't found time to wire
it yet. I don't think I could have ever been able to catch the actual
release mechanism and apply enough pressure to open it via traditional
methods; it appears the mechanism was jammed

I decided I'd try to fish the wires for the electric release out...
had to peel some of the weatherstripping away, but I got them both out
within about half an hour. The motor wasn't strong enough to clear the
jam right away, but I hit it with +14v half a dozen times and it
finally popped.

Let this be a lesson to all - install a secondary/emergency cable
right away! I'd read about this before but my cable looked to be in
good shape and I figured, "It won't happen to me." Before I close my
trunk again I'm installing two cables and wiring up the electric
release so I have three methods to gain entry. This was by far the
least fun I've ever had working on my car and I'm NOT doing it again
if I can help it.

-Ryan

On 2/25/06, Ryan Wright <ryanpwright@xxxxxxxxx> wrote:
> My trunk cable is broken & I can't get in. I've tried going up from
> above the master cylinder - the carpet & it's hard backing is in the
> way and can't be moved enough for access. I've tried disassembling the
> cable and pulling on the inner sheath as specified in a procedure
> found on dmcnews.com; what was left of the cable just came off in my
> hand.
>
> My only chance now is to fish a rod or something in from the passenger
> side but I've been working for 5 hours at that with no progress
> whatsoever. My whole body aches and I'm frustrated to no end. Any
> advice would be appreciated.
>
> If someone can email me a close-up picture of the latch mechanism,
> that would help a lot.
>
> Thank you....
>
> -Ryan
>


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/