[DMCForum] Re: Very Strange - my blower fan quit working completely

["lakelanier20" <derek4567@xxxxxxxxxxx>]

Ryan,
   I originally tested by touching the ground of the meter to the 
front fender.  Just now, I tested by touching the 3-prong black 
terminal on the fan itself.  The meter showed 12 v.  If I unplug the 
black wire that is closest to the seat (the easiest one to see) and 
put the black meter probe into that, I get a reading of 0 v.  
Strangely, this "ground" wire seems to loop around back into the same 
wire that the red positive wire comes from, with a small black 
cylinder around the wire along the way.

The other 2 black wires connected to the ground terminal on the fan 
seem to be ok though, since I get a good reading when touching the 
terminal itself.  But the fan still doesn't come on no matter what.


-Derek





--- In DMCForum@xxxxxxxxxxxxxxx, Ryan Wright <ryanpwright@...> wrote:
> 
> Have you checked the ground? If you have voltage on 1 & 2 at the fan,
> a bad ground is the most logical problem. When you tested, did you
> test with the ground on the fan, or somewhere else?
> 
> -Ryan
>

SPONSORED LINKS

Dmc	Dml	Dmc fz10
Dmc fz1s	Delorean part	Dml forte

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---