Re: [DMCForum] Re: [DML] Re: Torsion bar adjustment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: [DML] Re: Torsion bar adjustment



On 10/14/05, Martin Gutkowski <martin@xxxxxxxxxxxxxx> wrote:
>
> Not the sort of thing I'd expect to find in our equivalent over here,
> but a decent tool shop that does metric stuff should know immediately
> what you mean. If Helicoil doesn't make sense, say "thread insert kit"

OK, I'm off and looking today. Hopefully I can find this local.

> No that makes perfect sense.... strange. I take it you've tried two
> small pry bars, one on each side to pull it off? I've had some stubborn
> ones but they always come off like that. Much easier if you take the
> louvers off, and even better with the roof out the way, though this
> might not be practical!

Louvers are off, and I've tried to pry it out with a pair of
screwdrivers. I think I'll see if I can't find or make some small
pry-bars more suited to the task and try again.

> The Allen key is a 3/8"

Good, so I'm using the right one. :)

Thanks Martin, Greg, & everyone else who has replied!

-Ryan


SPONSORED LINKS
Dmc Dml Dmc fz10
Dmc fz1s Delorean part Dml forte


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated