[DMCForum] Re: DeLorean Side Stripe Kits

["Josh Porter" <joshp1986@xxxxxxxxx>]

VB 

How hard would it be to uninstall you kits? I don't have a kit yet 
but do plan on it in the future. I'm asking because, say I'm 20 years 
down the road and the things start to crack. I detailed cars for two 
years and hated when customers like farmers, rodeos, Churches and the 
power company wanted me to get the stickers off the side of the van. 
I only did it a few times because I kept on sctraching the tar out of 
the paint because the stickers were baked into the paint almost, and 
our heat gun was broken all two years so we used adhesive remover and 
a razorblade. Now it's easy for me to do but back then, boy.

Josh

--- In DMCForum@xxxxxxxxxxxxxxx, "Videobob Moseley" <videobob@xxxx> 
wrote:
> When you say "kits", do you mean more than one?
> 
> You can easily tell the difference between the repro's like mine 
and the 
> originals.
> The originals have a thin seam around the edges, and the "DMC" is 
screened 
> printed onto
> a smooth section on the fender in silver paint.
> The reproductions do not have the seam, and the "DMC" is cut out 
and not 
> printed.
> 
> There are not many unused original sets left, and I believe that 
the one set 
> that I have on hand is one of the best available with all the 
original 
> instructions, the squegee applicator and all.
> 
> I was considering selling them if someone were really interested in 
them, 
> however
> I am not anxious to get rid of them.
> I think I would have to have something on the order of $500.00 to 
let them 
> go.
> However I would not use them for the car, especially when you can 
get my 
> repro's
> for only $99.99 and they are not only as good but better in my 
opinion.
> Unless you are going for a concourse car or something....
> - Videobob
> 
> 
> >From: Packodenton@xxxx
> >Reply-To: DMCForum@xxxxxxxxxxxxxxx
> >To: dmcnews@xxxxxxxxxxxxxxx, DMCForum@xxxxxxxxxxxxxxx, 
> >doc-uk@xxxxxxxxxxxxxxx
> >Subject: [DMCForum] DeLorean Side Stripe Kits
> >Date: Sat, 1 Oct 2005 23:44:37 EDT
> >
> >
> >Dear All,
> >
> >A recent purchase of original side stripe kits (NOS DMC dealer 
inventory)
> >has me concerned. Should these kits be "saved" or can the kit be 
installed  
> >on
> >the car?
> >
> >In addition, how can you tell the difference between an original 
large side
> >stripe kit and a reproduction kit?
> >
> >Sincerely,
> >Mike
> >
> >NOTE:   THIS DOCUMENT MAY CONTAIN CONFIDENTIAL AND NONPUBLIC 
INFORMATION.  
> >IT
> >IS  INTENDED ONLY FOR THE USE OF THE INDIVIDUAL(S) OR ENTITY(IES) 
NAMED
> >ABOVE, AND  OTHERS SPECIFICALLY AUTHORIZED TO RECEIVE IT.  If you 
are not 
> >the
> >intended  recipient of this document, you are notified that any 
review,
> >dissemination,  distribution or copying of this communication is 
> >prohibited.  If you have
> >  received this communication in error, please notify me 
immediately by 
> >return
> >  email, delete the electronic message and destroy any printed 
copies.  
> >Thank
> >you for your cooperation.
> >
> >
> >[Non-text portions of this message have been removed]
> >

SPONSORED LINKS

Dmc	Dml	Dmc fz10
Dmc fz1s	Delorean part	Dml forte

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---