[DMCForum] Re: Restoring interior trim... What to use?

["Matt Spittle" <mds328@xxxxxxx>]

The actual steel posts have split???  If you mean that the plastic
that surrounds them has split, this is kinda normal.  You can fix it
by filling the hole with JB weld, and then placing the post back in
there.  Make sure to let it dry for like 6 or 8 hours.    

If the steel post really has split, then I would probably pull it
outta there and then get another one at a hardware store.  They might
not have the same thread (m6), but one of 1/4" would probably work
just as well.  

Matt
#1604


--- In DMCForum@xxxxxxxxxxxxxxx, "Brandon" <morpheus34711@xxxx> wrote:
> Hello group,
> 
> I have recently begun taking out my interior trim with the purpose of
> cleaning it and detailing it before reinstalling it.  I was wondering
> what my fellow DMC owners used to treat and protect their various
> pieces of vinyl (center console, dash, kneepads, etc.) I have heard
> grumblings about Armor All, but I never understood why people were so
> against using it.
> 
> On another note, upon removal of my kneepads I discovered that a few
> of the posts have split and are falling apart.  Is there a way to fix
> these without having to buy all new ones?
> 
> Thanks for any and all help!
> 
> Brandon
> #4205

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.