RE: [DMCForum] Need a bearing..

[Marc Levy <malevy_nj@xxxxxxxxx>]

I am not familiar with this setup..  However, if it is
more complex than a hub I will probably go with the
hub.

The bell housing has to go to a machine shop to have a
spacer made anyway, so a hub should only add another 6
months to the project!  :)

Life would be so much easier if I had my own machine
shop.  

--- timnagin <timnagin@xxxxxxxxxxxxxx> wrote:
> 
> Have you looked into an internal setup that
> eliminates the bearing like what
> is used on the GM 6-speed?
> 
> Greg



            
__________________________________ 
Yahoo! Messenger 
Show us what our next emoticon should look like. Join the fun. 
http://www.advision.webevents.yahoo.com/emoticontest

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.