[DMCForum] Re: www.delorean.ie updated - frame restoration!

["John Dore" <dmcjohn@xxxxxxxxxxx>]

Yes I do!

No-one who is against galvanising can give me an alternative soultion 
as to how the enclosed areas (front and rear crossmembers) can be 
rustproofed. You can paint POR-15 on the outside of the frame all 
day, but you will still have a frame that will inevitably rust from 
the inside out. I asked, but got no reply... 

There is the weight issue - galvanising might add the weight of a 
small child onto the frame, but really, who cares? I'd sooner have a 
rustproof slightly slower than stock DeLorean than one whose frame 
slowly dissolves into brown dust. Plus, the next job will be to swap 
out to a later model EFI 3.0 PRV with over 200bhp, so I don't think 
I'll worry about the weight issue then.

On the possibility of warpage of the frame, Rich says he has had a 
frame warp, but Ed Uding has done a few, all without warpage. So 
there is a chance...
I'm talking to Ed, and will take his advice on the best procedure, 
and hope for the best! The frame might warp, but it will be fixable, 
and is worth the risk for the amazing benefits...

Any up to date pics of your car around?

Thanks,
John

--- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx> wrote:
> I have already been bit by the "while you are in there" bug so I 
probably
> will.  By the way, with all the talk about galvanizing warping the 
frame, do
> you still intend to go that route?
> 
> Greg
> 
> 
> 
> -----Original Message-----
> From: John Dore [mailto:dmcjohn@xxxx]
> Sent: Friday, March 11, 2005 4:43 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] Re: www.delorean.ie updated - frame restoration!
> 
> 
> 
> 
> Hi Greg,
> 
> Thanks. Yes, I knew I had rust on the front of the frame, and knew 
if
> I intended keeping the car, that something had to be done about it,
> hence this project.
> 
> For the most part, the frame is in really nice condition, but I'm 
not
> sure this really shows in the pics, most of the pics of the frame I
> put on the website are the bad areas. I actually thought the front
> frame extension was worse than it was, and thought for a while that 
I
> would end up buying a new front frame extension from Ken. But, I
> think now that the one I have is very repairable.
> 
> I would definitely recommend doing this job. Its not hard at all,
> just lots of nuts and bolts, and would be made far easier if you 
have
> access to a 2 post lift to separate the frame and body.
> 
> Then galvanise the frame, and never worry about rust again!
> 
> Thanks,
> John
> 
> --- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx> wrote:
> > Great pictures, John.  Were you aware of the extent of rust before
> you
> > started this project?  What surprises did you find along the way?
> I am
> > still debating doing this to my car.
> >
> > Greg
> >
> >
> > -----Original Message-----
> > From: John Dore [mailto:dmcjohn@xxxx]
> > Sent: Thursday, March 10, 2005 3:47 AM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: [DMCForum] www.delorean.ie updated - frame restoration!
> >
> >
> >
> >
> > Hi lads,
> >
> > Just to let you know I updated the website of the DeLorean Owners 
in
> > Ireland at http://www.delorean.ie
> >
> > Check out the technical section to see what's been done so far in 
my
> > frame restoration! (Just stripped at the moment - but lots of pics
> of
> > the frame removal process).
> >
> > Thanks,
> > John Dore, Ireland.
> > Vin 3810

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.