[DMCForum] Re: 24valve 3.0 PRV Heads?

["Christophe Vieira" <88mph@xxxxxxxxxxxx>]

Hello Dave and list,

In France and Europe, it is "easier" to find complete engine in 
donor cars than just alone, but these engines usually have very high 
mileage. I won't tell you that you can go in any junkyard and find 
the engine of your dreams but after some researches, it is possible.

If I understand well, you want a complete engine except bloc.
Just to give an idea, here is the price for a complete new 3 liters 
24 valves engine with all accessories (starter, ECU, harnesses, 
etc...): $14.000 without VAT. I asked for this price only 2 or 3 
weeks ago. This price includes all parts needed for a running 
engine. The only engine cost $8.000 without accessories.

I think, if you are not expecting an engine with less then 10.000 
miles, that it could be possible to find a complete running engine 
for less than $1.500. Sorry but the EUR/USD conversion makes the 
price so high.

With best regards from France,

Chris.
VIN#04271.


--- In DMCForum@xxxxxxxxxxxxxxx, "Dave Stragand" 
<dave.stragand@xxxx> wrote:
> Hello Christophe,
>  
> I was hoping you could tell me how hard it was to get 24v PRV 
heads there,
> and how much a junkyard might sell them for?  I might be 
interested in
> putting those on the new engine I am building for my DeLorean.
>  
> Thanks!
>  
> -Dave

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.