RE: [DMCForum] Re: John Lane's PRV

["Dave Stragand" <dave.stragand@xxxxxxxxxxxxxxx>]

Well, the Eagle is even-fire, so that would kinda shoot the ignition.  The
eagle block is almost machined for the distributor, but the hole isn't
drilled out (even though the hold-down clamp spot is, go figure).

-----Original Message-----
From: Marc Levy [mailto:malevy_nj@xxxxxxxxx] 
Sent: Wednesday, January 19, 2005 8:02 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] Re: John Lane's PRV


Your saying, one could get a 3.0L eagle engine, put
the DMC cradle on it, put in "turbo" cams and valves,
bolt the turbos up, and away we go??

What kind of boost will this handle?  And when can you
send me those cams and valves? :)



[Non-text portions of this message have been removed]

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.