RE: [DMCForum] Nology Ignition

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

No, I have now sourced the plug boots and don't need the old ones. You can
keep your old ones.
John

  -----Original Message-----
  From: timnagin [mailto:timnagin@xxxxxxxxxxxxxx]
  Sent: Friday, January 14, 2005 4:33 PM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: RE: [DMCForum] Nology Ignition


  John,

  Do these have the umbrella boots on them already?  I remember somewhere
  about sending you the old ones or something like that.

  Greg



  -----Original Message-----
  From: John Hervey [mailto:john@xxxxxxxxxxxxxxxx]
  Sent: Friday, January 14, 2005 5:28 PM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: RE: [DMCForum] Nology Ignition



  Rick,
  Anything is an upgrade to the stock wires. I have 8mm silicone with less
  than 500 ohms / ft or MSD wire at less than 50 ohms per ft. Life warranty.
  Couple that with a MSD coil or a Pertronix coil and your there. They wires
  are also 2/3 rd's the cost of Nology.
  John Hervey
  www.specialtauto.com





    -----Original Message-----
    From: Rick [mailto:rdevaux@xxxxxxxxx]
    Sent: Friday, January 14, 2005 2:29 PM
    To: DMCForum@xxxxxxxxxxxxxxx
    Subject: [DMCForum] Nology Ignition



    Has anyone tried the Nology ignition upgrade that's available?  Any
    noticable performance?



----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

    b.. To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.