Re: Rebuilt distrobutor WAS: Re: [DMCForum] BTTF on TBS

[Andrei Cular <acular@xxxxxxxxxxxxxxx>]

Sure the only parts that go bad are the rubber o-rings, and for 
temporary use those could be made out of almost anything the doesn't 
dissolve instantly in gas.  The hardest part would be removing the torx 
screws that hold the thing together.  But even then a small cold chisel 
could be use to pop the heads off and new molts could be run through.

Andrei The King of rigging

Flavia wrote:

>Would it be possible in 1885? :)
>
>Flavia
>--- In DMCForum@xxxxxxxxxxxxxxx, Andrei Cular <acular@xxxx> wrote:
>  
>
>>They are 100% rebuildable.  I have done it several times and it 
>>    
>>
>does not 
>  
>
>>cost anywhere $400 to do.  With $10 worth of o-rings and a fair 
>>    
>>
>amount 
>  
>
>>of paitance anyone can rebuild one that isn't too rusted.
>>
>>
>>Andrei
>>
>>DMCVIN6683 wrote:
>>
>>    
>>
>>>If you know what you are doing they can be rebuilt, I myself do 
>>>      
>>>
>not 
>  
>
>>>know how to rebuild one.
>>>
>>>Mark V
>>>      
>>>
>
>
>
>
>
>
>
> 
>Yahoo! Groups Links
>
>
>
> 
>
>
>
>
>  
>

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.