Hi all, Has anyone got any advice on how to change my TABs on my automatic DeLorean. I took the shield things off to take a look as I was getting some rear end swaying at motorway speeds and it turned out the passenger side bolt was only hand tight with all the shims missing and about 3mm of play and the driver side bolt is as bent as a dogs hind legs. It looks as if I can only get to one side of the bolt as the tranny is much bigger than the manual tranny and is in the way. Any help would be greatly appreciated. James RG P.S. it's nice to have a fresh start DML was starting to bore me a bit.