Re: [DMCForum] 5096 Hot-Start
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] 5096 Hot-Start



I forgot to note, I do have a manual transmission. I could be wrong but
I think the black dust is from the clutch.

Samuel wrote:

>I have finally solved my hot-start problem on #5096. Between a bad
>starter motor (became evident last weekend that it had issues compared
>to earilier), a major vacuum leak (resulting in not getting any gas when
>starting), and having 8 degrees for my timing instead of 13 all caused
>problems. I can finally drive it without it dying! ...  DOH! It's still
>in hover mode. Rims look nice though.
>
>http://www.lightspeed.cx/lightning/delorean-5096/Work_10_19_2004/rims.jpg
>
>Question, is the start motor, with 20 years of use, suppose to look like
>this on the end?
>
>http://www.lightspeed.cx/lightning/delorean-5096/Work_10_19_2004/starter.jpg
>http://www.lightspeed.cx/lightning/delorean-5096/Work_10_19_2004/starter2.jpg
>
>My weekend consists of adjusting the timing a bit more (currently sits
>around 11 degrees at idle), and fix the major vacuum leak that is
>resulting in the air meter plate not moving much.
>
>Samuel
>#5096
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>

>

Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated