[DMCForum] Re: 24valve 3.0 PRV

["Christophe Vieira" <88mph@xxxxxxxxxxxx>]

Hello all,

I'm new on this list so a little presentation : my name is 
Christophe, I'm 32 years old and I work as analyst programmer, I 
live in France and I am the proud owner of VIN#04271.

Sure, replace the DeLorean engine with a 24v PRV is a good idea, I 
plan myself to make this swap with some improvements. These engines 
are common here but this kind of engine was usually mounted on 
touring cars so they usualy have a high mileage. These are still 
available as new.

Some little problems :
1) The 24v PRV is installed crosswise instead of lengthwise.
2) The engine mount is different (suspended), must keep the original 
one.
2) The gearbox is almost on the side of the engine, not like the 
DeLorean.

But the swap is possible, not inexpensive but possible...

Not all Peugeot 605 or Citroën XM have the 24v engine, only models 
from 1990 to 1997 for both. Before, they have 12v and after the 
engine is at 60°, not 90°.

Best very regards from France,

Chris.

--- In DMCForum@xxxxxxxxxxxxxxx, "John Dore" <dmcjohn@xxxx> wrote:
> 
> Hi lads,
> I'm planning on putting a more modern PRV engine in my car, the 
> engine from a Peugeot 605, which is a 200bhp EFI 24valve 3.0 PRV. 
> After putting a free flow exhaust on it, it should reach hopefully 
> 210 to 215 bhp. What do you think?!
> Thanks,
> John

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.