RE: [DMCForum] Re: Junction point
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DMCForum] Re: Junction point
- From: "timnagin" <timnagin@xxxxxxxxxxxxxx>
- Date: Mon, 30 Aug 2004 18:12:40 -0400
Rich,
Ok that gives me a starting point to look. I will see what I can find, snap
a few pictures, and let you know.
Greg
-----Original Message-----
From: cruznmd [mailto:racuti1@xxxxxxxxxxxx]
Sent: Monday, August 30, 2004 5:59 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Re: Junction point
I suspect it's in the parcel shelf region. It's either in the ECU
compartment or the relay compartment.
I checked the ECU plug. It has a shielded blue cable going into the
connector and a bundle of smaller wires coming out;
green for power,
black for ground,
white/slate for "pulse distribution"
The drawing makes it appear as if the junction is in the relay
compartment. Also, dig this: The wire to the coil is a stiff, steel-
like wire and the ones for the tach and RPM relay are standard
coppper. I really am curious now.
Also, what Walt and Andrei are saying about plug gap and dizzy cap
wear really has my clock ticking. I'm going to pull them and re-gap
them. It'll only take a minute. I've ordered a new cap too. I think
I'm very close to fixing this.
Rich
--- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx> wrote:
> Rich,
>
> If you can give me a general area to start looking I can check my
car for
> you since it is pretty much gutted. I can also take some pictures
if that
> will help.
>
> Greg
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN