[DMCForum] Re: Clutch replacement procedure

["ryanpwright" <yahoo1@xxxxxxxxxxxxxx>]

Also.... The clutch kit says the friction surface of the flywheel MUST
(in big bold capital letters) be resurfaced.

Is this so? Or is it more like brake rotors, where it's often claimed
you have to resurface the rotors but if they aren't grooved or
otherwise damaged you don't really have to?

Thanks again,

-Ryan

--- In DMCForum@xxxxxxxxxxxxxxx, "ryanpwright" <yahoo1@xxxx> wrote:
> Hello,
> 
> I'm replacing my clutch this afternoon (PJ Grady's complete
> Centerforce clutch kit), and need a basic procedure on how to do it.
> I've never done this before. For that matter, I don't even know
> exactly where the pressure plate, etc, is located, let alone how to
> get to it and what to do once I've got it apart.
> 
> Any advice would be greatly appreciated. I'll be replacing the master
> & slave cylinders & clutch line over the next few hours, and the rest
> of the clutch will be done after that.
> 
> Thank you,
> 
> -Ryan

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.