[DMCForum] Junction point

["cruznmd" <racuti1@xxxxxxxxxxxx>]

In case you all missed it before:

Does anyone know the exact location of the junction point where the 
white/slate wire T-'s off to it's many other locations? I want to 
check that junction.

According to the wiring diagram, after leaving the ECU it splits off 
to provide a path to the coil, tach and RPM relay.

Also, when I inspected my nearly new dizzy cap, I noticed a lot of 
carbon scoring on the contacts. I scraped most of it off, but still 
couldn't get them shiny. They still had black burn tracks on them. 
I'll pick up another one today, but what could cause it to be so 
excessive? Even though I cleaned them, and the cap was installed in 
March, could this contribute to the problem?

Rich A.

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.