[DMCForum] Re: WAS: Paying for college, now DPNW door actuators...

["ryanpwright" <yahoo1@xxxxxxxxxxxxxx>]

I didn't mention (in case this wasn't obvious) - Everything you have
to tear apart for the door lock actuators, you also have to tear apart
for the launchers. So if you're going to do one you might as well do
them both at the same time and save yourself some hassle.

All you have to take apart are the interior door panels and then pull
the covers that access the relay compartments on the left & right
sides of your parcel shelf.

-Ryan 

--- In DMCForum@xxxxxxxxxxxxxxx, "Joe OBrien" <joeyoseppijoe@xxxx> wrote:
> Ryan, 
> 
> following your threads in the main group, I've been meaning to ask 
> you if you happen to have a scan or a copy of the instructions for 
> the door launchers or the actuators? I've been contemplating 
> installing them, but wondered if you had a scan you could share with 
> the group, then we all could have a look? Just curious as to what 
> all it requires to install.
> 
> I will be ordering a few things from toby later this month, and was 
> contemplating ordering the solenoids, and possible the launchers, 
> but I'm not sure how much of the car has to be torn apart for the 
> launchers.
> 
> Thanks,
> 
> Joe

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.